☰ Menu Liberty Mechanical Corp. e-Learning

Colorado Plumbing License 8-hour Continuing Education Course

Colorado Plumbing License 8-hour Continuing Education Course

Colorado Plumbing License 8-hour Continuing Education Course



Colorado_Plumbing_CU Course_Title_Display_blue_background

Course Content Outline

Module 1: Review of Colorado Plumbing Board Policy Statements

Module 2: 2012 IPC Selected Chapters Review

Module 3: 2021 IFGC Selected Sections Review

Module 4: Colorado Plumbing Rules and Regulations

Module 5: Workers Safety


Only $79.00



‌This course meets the Continuing Education (CE) requirements as set forth by the Colorado State Plumbing Board for the 12 month period of
March 1st 2024 to February 28th 2025


Continuing Education Details Colorado Plumbing Rules and Regulations
×
Basic Colorado Plumbing Continuing Education Requirements

    1. 1. A minimum of 8-hours of CE must be completed every 12 months during the license cycle.
    2. 2. Licensees must attest upon renewal that they have read the current Colorado Plumbing Code.
    3. 3. One CE is equal to one hour.

Colorado PLumbers CEu requirements

Colorado State Plumbing Board: Plumbing License Continuing Education Requirements

On April 16, 2019, Governor Polis signed HB 19-1086 into law. On or after May 1, 2021, all licensed Residential, Journeyman, and Master Plumbers must complete eight (8) hours of Continuing Education (CE) every twelve months in order to renew a license. This requirement does not apply to the first renewal or reinstatement of a license for which, as a condition of issuance, the applicant successfully completed a licensing examination.


Requirements

Licensees must complete the following requirements for the renewal of a license:


  1. A minimum of eight (8) hours of CE must be completed every 12 months during the license cycle. The continuing education hours must be selected from among the Core Competencies below in any combination, except that, within every twenty-four month period, a minimum

    of four (4) CE hours must be related to codes as defined in Board Rule. Additionally, no more than two (2) hours will be accepted in CE courses related to safety training.


    1. Cross connection and backflow prevention

    2. Fixtures, Faucets and Fixture Fittings

    3. Indirect/Special Waste

    4. Industry Product Training

    5. Non-potable Water Systems

    6. Plumbing Administration

    7. Residential Fire Sprinkler Systems

    8. Sanitary Drainage

    9. Special Piping (Medical Gas)

    10. Storm Drainage

    11. System piping and components

    12. Traps, Interceptors and Separators

    13. Vents - DVM

    14. Water Heaters

    15. Water Supply and Distribution

    16. Safety related to the plumbing industry.

  2. Licensees must attest upon renewal that they have read the current Colorado Plumbing Code.

Licensees holding multiple plumbing licenses issued by the Board must complete CE requirements for the most advanced license held. Completion of CE requirements for the most advanced license shall satisfy the requirements for all lesser licenses.